[Nov-2024] Free 350-801 Exam Dumps to Improve Exam Score
2024 Realistic 350-801 Dumps Exam Tips Test Pdf Exam Material
NEW QUESTION # 40
What does average rate limiting allow?
- A. more traffic than the CIR to be sent when there is available bandwidth
- B. transmits traffic bursts up to the Bc size
- C. bandwidth up to the Be size
- D. traffic to burst to the Be size when there is available bandwidth
Answer: D
NEW QUESTION # 41
Refer to the exhibit. An administrator configured a codec preference list with G.722 and ILBC codecs. Which change must the administrator make in the dial-peer section of the configuration to use this list?
- A. add voice-class codec 20
- B. add codec preference 20
- C. add session codec 20
- D. add voice-codecs 20
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/voi-negt- aud-code.html
NEW QUESTION # 42
Refer to the exhibit.
An engineer verifies the configured of an MGCP gateway. The commands are already configured. Which command is necessary to enable MGCP?
- A. Device(config)# mgcp enable
- B. Device (config)# mgcp
- C. Device(config)# ccm-manager enable
- D. Device (config) # com-manager active
Answer: B
NEW QUESTION # 43
Refer to the exhibit. Which codec should an engineer select for a call mode between "Dallas- REG" & "Austin-REG"?
- A. G.729
- B. OPUS
- C. MP4A-LATM
- D. G.711
Answer: A
NEW QUESTION # 44
A user dials 9011841234567 to reach Vietnam. Which steps send the call to the PSTN provider as
011841234567?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
NEW QUESTION # 45
A DTMF mismatch is occurring between an MGCP gateway registered FXS port and a Cisco Unified Communications Manager SIP trunk. Which media resource can be leveraged to interwork this mismatch?
- A. Annunciator
- B. Trusted Relay Point
- C. Conference Bridge
- D. Media Termination Point
Answer: D
Explanation:
Section: Cisco IOS XE Gateway and Media Resources
NEW QUESTION # 46
An engineer must manually register an analog port with cisco UCM using the MGCP protocol.
Which commands are required?
mgcp
- A. mgcp call-agent 172.16.1.252
ccm-manager config server 172.16.1.252
ccm-manager config
ccm-manager mgcp
! d
ial-peer voice 1 pots
application MGCPAPP
port 1/0/0
shut
no shut
!
no mgcp - B. mgcp call-agent 172.16.1.252
ccm-manager config server 172.16.1.252
ccm-manager config
ccm-manager mgcp
!
dial-peer voice 1 pots
port 1/0/0
shut
no shut
!
mgcp - C. ccm-manager config server 172.16.1.252
ccm-manager config
!
dial-peer voice 1 pots
application MGCPAPP
port 1/0/0
! - D. mgcp call-agent 172.16.1.252
ccm-manager config server 172.16.1.252
ccm-manager config
ccm-manager mgcp
!
dial-peer voice 1 pots
port 1/0/0
shut
no shut
!
mgcp
Answer: A
NEW QUESTION # 47
Where is the default for maximum session Bit Rate for a region configured?
- A. Enterprise parameters configuration
- B. Service parameter configuration
- C. Enterprise Phone configuration
- D. Region configuration
Answer: B
Explanation:
For enhanced scalability and to conserve resources, Cisco recommends that you properly set the default values in the Clusterwide Parameters (System - Location and Region) section of the Cisco Unified Communications Manager Administration Service Parameters Configuration window for the audio codec, video call bandwidth, and link loss type values and then choose the Use System Default entries in the Cisco Unified Communications Manager Administration Region Configuration window for these fields.
NEW QUESTION # 48
A collaboration engineer must optimize the dial plan within Cisco UCM. There are multiple remote sites. And each site has its own route patterns and local gateways.
What should the engineer do on the cisco UCM to optimize the dial plan?
- A. Create a centralized dial plan with a Cisco UCM Session Management Edition cluster or a Cisco gatekeeper.
- B. Configure a Standard Local Route Group to use a single route pattern for all calls within the cluster.
- C. Leverage Cisco UCM Express as SRST so the phones can have more features of each remote site
- D. Implement ILS with GDPR so the dial plan can dynamically replicate across clusters.
Answer: B
Explanation:
The Local Route Group feature helps reduce the complexity and maintenance efforts of provisioning in a centralized Cisco Unified Communications Manager deployment that uses a large number of locations.
NEW QUESTION # 49
Which command is used in a Cisco IOS XE TDM gateway to configure the voice T1/E1 controller to provide clocking?
- A. Clock source line
- B. Clock source internal
- C. Clock source network
- D. Cisco IOS XE TDM gateway T1/E1 controller cannot provide clocking.
Answer: B
Explanation:
XE IOS only have line and internal clock source.
https://www.cisco.com/c/en/us/td/docs/routers/ncs4200/configuration/guide/tdm/16-12-1/b-tdm-t1- e1-xe-16-12-1-ncs4200.html
NEW QUESTION # 50
An engineer builds the configuration on a Cisco IOS gateway for the dial-peers:
Which command is required to complete the configuration?
- A. Codec g711ulaw
- B. Codec g723ar63
- C. Codec g726r32
- D. Codec g729cr81
Answer: A
NEW QUESTION # 51
Which Cisco Unified Communications Manager service parameter should be enabled disconnect a multiparty call when the call initiator hangs up?
- A. Enterprise Feature Access Code for Conference
- B. Block OffNet To OffNet Transfer
- C. Drop Ad Hoc Conference
- D. H.225 Block Setup Destination
Answer: C
Explanation:
Section: Infrastructure and Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmsys/ CUCM_BK_SE5FCFB6_00_cucm-system-guide-100/CUCM_BK_SE5FCFB6_00_cucm-system-guide-
100_chapter_011000.html#CUCM_TK_DFC66444_00
NEW QUESTION # 52
Which Cisco lM and Presence service handles failover and state changes in the cluster?
- A. Cisco XCP Connection Manager
- B. Cisco Server Recovery Manager
- C. XCP router
- D. XCP Sync Agent
Answer: B
NEW QUESTION # 53
The enterprise network is migrating to a global dial plan and running a few devices in the test phase. Which change is performed by the system to the information dialed when the Cisco UCM endpoint dials an external destination under a global dial plan?
- A. The destination is transformed using site-specific route patterns
- B. The normalization script modifies the calling party
- C. The calling party is globalized using translation patterns
- D. The destination is globalized using translation patterns to normalize the called party
Answer: D
NEW QUESTION # 54
Which two actions must be taken to provision a new device using self-provisioning?
- A. Enable the self-provisioning IVR in the Cisco UCM
- B. Ensure the user has a directory URI and a primary extension.
- C. Link the appropriate universal device template to the user profile.
- D. Link the appropriate service profile to the provisioning template.
- E. Import the user profile to the corporate LDAP directory.
Answer: A,C
Explanation:
Self-Provisioning of a phone to a user needs:
* an End user with a primary extension and a Feature Group Template
* the Feature Group Template needs a User Profile
* the User Profile needs a Universal Line and Universal Device Template Finally to activate it you need a CTI route point and a configured IVR service to actually register it.
HOWEVER, it looks like you dont actually NEED the IVR to technically fullfil the goal of self- registration, as users can use the URL based registration. but i am not 100% sure if you wont need the IVR anyways, even if you arent using it - the guide is not 100% clear on that
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications- manager-callmanager/214228-configure-self-provisioning-feature-on-c.html
NEW QUESTION # 55
Refer to the exhibit.
Refer to the exhibit. Which action must an engineer take to implement self-provisioning on a primary communications manager server?
- A. Select a different Universal Device Template.
- B. Select a different Universal Line Template.
- C. Uncheck the auto-registration Disabled checkbox.
- D. Change the SIP Phone Secure Port.
Answer: C
NEW QUESTION # 56
An incoming off-net call to a user fails. An engineer notices that the off-net call is G.711, but the phone accepts only G.729. Which media resource on a Cisco Unified Border Element and Cisco Unified Communications Manager must the engineer configure to manage the codec negotiation?
- A. MTP
- B. CFB
- C. transcoder
- D. MOH
Answer: C
Explanation:
Section: Infrastructure and Design
NEW QUESTION # 57
End users report bad video quality and voice choppiness on Cisco Collaboration endpoints. The engineer changed the device pool the users were in but did not correct the problem. Which action should be taken to troubleshoot this issue?
- A. Set the service parameter Use Video Bandwidth Pool for Immersive Video Calls to "false"
- B. Use direct IP address calls between two endpoints to troubleshoot call quality issues
- C. Restart the Cisco Location Bandwidth Manager service on the Cisco UCM publisher
- D. Check for duplex/speed mismatches between the network port settings of the system and network switch
Answer: A
Explanation:
Section: QoS
NEW QUESTION # 58
Refer to the exhibit.
An engineer is troubleshooting a codec negotiation issue where both endpoints that are involved in the call support the codecs listed in the exhibit. Which audio codec is selected il a call between two endpoints in Region 1 is placed?
- A. G.722
- B. G.711u
- C. G.711a
- D. G.729
Answer: A
NEW QUESTION # 59
Which information is needed to restore the backup of a Cisco UCM publisher successfully?
- A. the application credentials for Cisco UCM
- B. the security password for Cisco UCM
- C. the FTP server details
- D. the TFTP server details
Answer: B
NEW QUESTION # 60
Refer to the exhibit A user takes a phone from San Francisco to New York for a short reassignment. The phone was set up to use the San Francisco device pool, and device mobility is enabled on the Cisco UCM. The user makes a call that matches a route pattern in a route list that contains the Standard Local Route Group. To where does the call retreat?
- A. The call fails because the Standard Local Route Group is being used only if no configuration is set for the device pools
- B. The call egresses in San Francisco because the user uses device mobility and is allowed to roam while still keeping the number and resources assigned in San Francisco
- C. The call fails because device mobility is turned on. and the phone is not configured in New York The engineer must configure which sites the device should be roaming to
- D. The call egresses in New York because the device automatically is assigned a New York device pool and uses the local gateway
Answer: B
NEW QUESTION # 61
......
The 350-801 exam covers a wide range of topics related to collaboration technologies, including Cisco Unified Communications Manager (CUCM), Cisco Unity Connection, Cisco Unified Contact Center Express (UCCX), Cisco Expressway, and Cisco Meeting Server. It also covers various collaboration protocols, such as Session Initiation Protocol (SIP) and H.323, and technologies such as Quality of Service (QoS) and IP Multicast.
Powerful 350-801 PDF Dumps for 350-801 Questions: https://dumpstorrent.exam4pdf.com/350-801-dumps-torrent.html
