[Feb 15, 2022] 010-151 Sample with Accurate & Updated Questions
010-151 Exam Info and Free Practice Test | Exam4PDF
You can read the Cisco Certified Technician Data Center (010-151) Exam advantages below
Cisco Certified Technician Data Center (010-151)Cisco Certified Technician Data Center (010-151) has more useful and relevant networks that help them in setting career goals for themselves. Cisco Certified Technician Data Center (010-151)Cisco Certified Technician Data Center (010-151) networks provide them with the right career direction than non certified usually are unable to get.
Cisco Certified Technician Data Center (010-151)Cisco Certified Technician Data Center (010-151) Certification provides practical experience to candidates from all the aspects to be a proficient worker in the organization.
Cisco Certified Technician Data Center (010-151)Cisco Certified Technician Data Center (010-151) is distinguished among competitors. Cisco Certified Technician Data Center (010-151)Cisco Certified Technician Data Center (010-151) certification can give them an edge at that time easily when candidates appear for a job interview employers seek to notify something which differentiates the individual to another.
Cisco Certified Technician Data Center (010-151)Cisco Certified Technician Data Center (010-151) Certifications provide opportunities to get a job easily in which they are interested in instead of wasting years and ending without getting any experience.
Cisco Certified Technician Data Center (010-151)Cisco Certified Technician Data Center (010-151) will be confident and stand different from others as their skills are more trained than non-certified professionals.
Cisco Certified Technician Data Center (010-151)Cisco Certified Technician Data Center (010-151) has the knowledge to use the tools to complete the task efficiently and cost effectively than the other non-certified professionals lack in doing so.
The Cisco 010-151 test concerns one’s competency in the basic configuration of Cisco NX-OS, familiarity with various Data Center products alongside hardware elements with a focus on the UCS (Unified Computing System). Those who pass this exam can opt for the CCT Data Center certificate. CCT in this case refers to Cisco Certified Technician and is availed at the entry level of the vendor’s accreditation schema.
NEW QUESTION 77
Drag the password recovery procedures on a Cisco NX-OS switch from the left to the right and place them in order.
Answer:
Explanation:
NEW QUESTION 78
What is the correct path to verify the Overall Status of Chassis 1 | Server 3?
- A. Status Tab > Chassis > Chassis 1 > Servers > Server 3
- B. Servers Tab > Chassis > Server 3 General tab
- C. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 FSM tab
- D. Admin Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
- E. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
- F. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 Status tab
Answer: E
NEW QUESTION 79
Refer to the exhibit.
Which Cisco MDS chassis supports the 48-Port 16-Gbps Fibre Channel Switching Module?
- A. MDS 9513
- B. MDS 9506
- C. MDS 9710
- D. MDS 9509
Answer: C
NEW QUESTION 80
In the Cisco UCS S3260 Storage Server which two of the below ports are available on a System I/O Controller? (Choose two.)
- A. QSFP port
- B. Ethernet LOM port
- C. KVM Console port
- D. Dedicated Management port
- E. PCle ports
Answer: A,E
NEW QUESTION 81
When replacing a standalone C-Series server which order will be used to shut down the server via CIMC?
- A. Click Host power, Click Shut down
- B. Click Power off, Click Shut down
- C. Click Host power, Click Shut off
- D. Click Power off, Click Shut off
Answer: B
NEW QUESTION 82
Refer to the exhibit.
Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?
- A. A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED.
- B. A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.
- C. A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.
- D. A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.
Answer: D
NEW QUESTION 83
Which tool is needed when servicing a UCS M5 server?
- A. M5 DIMM puller
- B. PCIe slot cover
- C. HDD removal tool
- D. T-30 Torx driver
Answer: D
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C220M5/install/C220M5/ C220M5_chapter_010.html
NEW QUESTION 84
Refer to the exhibit.
Which Cisco MDS chassis supports the 48-Port 16-Gbps Fibre Channel Switching Module?
- A. MDS 9513
- B. MDS 9506
- C. MDS 9710
- D. MDS 9509
Answer: C
Explanation:
Topic 4, Service related Knowledge
NEW QUESTION 85
Refer to the exhibit.
What is the name of this Cisco MDS 9700 Series network module?
- A. Cisco MDS 24-/10-port SAN Extension module
- B. Cisco MDS 9700 48-port 16-Gbps switching module
- C. Cisco MDS 48-Port 10-Gbps Fibre Channel over Ethernet module
- D. Cisco MDS 9700 48-port 32-Gbps Fibre Channel switching module
Answer: A
NEW QUESTION 86
The Ethernet specification details several different fiber optic media types. What is the wire transmission speed for 100BASE-FX Ethernet?
- A. 100 Mb/s
- B. 10 Mb/s
- C. 1000 Mb/s
- D. 10000 Mb/s
Answer: A
NEW QUESTION 87
Which two major components does a Cisco Nexus 1000V Series Switch have? (Choose two.)
- A. Virtual Ethernet Module
- B. Virtual Supervisor Module
- C. Virtual Network Module
- D. Virtual Fiber Channel Module
- E. Virtual Memory Controller Module
Answer: A,B
NEW QUESTION 88
Which two statements about the Ethernet media are true? (Choose two.)
- A. 40 Gigabit Ethernet twinax cables deploy Enhanced Quad Small Form Factor Pluggable (QSFP+) connectors.
- B. A twisted-pair cable system has each pair of wires twisted together to reduce electromagnetic interference.
- C. Compared to multimode fiber, the single-mode fiber is designed for shorter distances with higher cost.
- D. The twinax cables can be found in either a shielded twisted-pair or an unshielded twisted-pair variation.
Answer: A,B
NEW QUESTION 89
If the Overall Status for a Cisco UCS B-Series Blade Server indicates a failure in the Cisco UCS Manager, such as discovery-failed, which statement is true?
- A. The endpoints on that server cannot be upgraded.
- B. The server is online, but the administrator cannot assign a service profile to that blade.
- C. The server shuts down.
- D. The server automatically reboots reboot in 3 minutes.
Answer: A
NEW QUESTION 90
Which statement is true about QSFP?
- A. QSFP-DD stands for Quad Small Form Factor Pluggable Double Distance.
- B. The four 10 Gbit/sec channels that QSFP+ supports can be combined into a single 40 Gigabit Ethernet link.
- C. 100GBASE-SR4 supports a much longer distance than 100GBASE-LR4.
- D. The QSFP+ offers higher data speed than QSFP28.
Answer: B
NEW QUESTION 91
Refer to the exhibit.
This image shows a CPU Pick-and-Place tool and a CPU Socket Protective Cap Removal tool. Which types of Cisco UCS servers and Intel Xeon processors do these tools support?
- A. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2600 Series processors
- B. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2400 Series processors
- C. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5- 2600 Series processors
- D. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5- 2400 Series processors
Answer: A
NEW QUESTION 92
Which type of optics module is supported by a Cisco Nexus 7700 F4-Series 30-Port 100-Gigabit Ethernet Module?
- A. SFP+
- B. QSFP28
- C. Cisco CPAK
- D. QSFP+
Answer: D
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/datasheet- c78-741486.html
NEW QUESTION 93
What is the maximum number of supervisor modules that the Cisco MDS 9710 Switch supports?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: E
NEW QUESTION 94
Refer to the exhibit.
Which option should you select to get the output of the show tech-support detail command for the Cisco UCS B-Series blade?
- A. D - rack-server
- B. C - fabric-extender
- C. B - chassis
- D. A - ucsm
Answer: C
NEW QUESTION 95
Which two statements are true for the Ethernet 802.3 standard? (Choose two.)
- A. The IEEE 802.3ab standard defines 10 Gigabit Ethernet over unshielded twisted-pair (UTP).
- B. An 802.3 Ethernet frame is 68 to 1518 bytes in length.
- C. It defines physical layer and data link layer protocols.
- D. CSMA/CD eliminates collisions for the switched LAN where multiple collision domains reside.
- E. Network layer protocol is carried in the payload field.
Answer: C,D
NEW QUESTION 96
Refer to the exhibit.
Which two faults can occur if the System Health LED is in a steady amber state? (Choose two.)
- A. CPU mismatch
- B. Major fault with memory DIMM
- C. Major fault with the system board
- D. At least one DIMM is faulty.
- E. Major fault with CPU
Answer: B,E
NEW QUESTION 97
Which command can be used to exit to EXEC mode from this current mode? switch(config-if) #
- A. Ctrl-L
- B. quit
- C. end
- D. exit
- E. Ctrl-C
Answer: C
NEW QUESTION 98
Refer to the exhibit.
Which Cisco MDS chassis supports the 48-Port 16-Gbps Fibre Channel Switching Module?
- A. MDS 9513
- B. MDS 9506
- C. MDS 9710
- D. MDS 9509
Answer: C
NEW QUESTION 99
......
Pass Cisco 010-151 Premium Files Test Engine pdf - Free Dumps Collection: https://dumpstorrent.exam4pdf.com/010-151-dumps-torrent.html
